Attachments & Implements

Bobcat Brush Saw Attachment

Browse specs and more for the Bobcat Brush Saw Attachment - Bobcat of Huntsville
  • Cut away brush and clear small trees with the brush saw attachment (also known as a brush cutter)
  • Quickly and conveniently remove small trees up to 15 feet tall without leaving stumps
  • Saw off trees flush with the ground or just below the surface
  • Replaceable carbide-tipped teeth
  • Three cutting angles for leading operational visibility
85 in Length
28.5 in Cutting Wheel Diameter
15 Number of Teeth

Call Your Local Bobcat of Huntsville Location For Availability.

Compatibility

Works With These Bobcat Machines

Compact Track Loaders

T64-2 T66-2 T76-2 T86-2 T450 T595 T650 T770

Skid-Steer Loaders

S64-2 S66-2 S76-2 S86-2 S450 S650 S770

Small Articulated Loaders

L35
How It Works

How the Bobcat Brush Saw Attachment Works

The brush saw’s counterclockwise blade moves at a speed up to 2,985 feet per minute. The cutting action of the brush saw cuts trees, brush and saplings just below ground level to minimize stumps.

The operator uses the loader steer and travel functions to swing the brush saw left and right, and to move forward into the material being cut. Materials cut away are discharged to the left and away from the loader and attachment.

Specifications

Bobcat Brush Saw Attachment Specs

** Listed specs are for reference. Actual specs may vary by model and configuration. **

Length 85 in
Cutting Wheel Diameter 28.5 in
Number of Teeth 15
Max. Wheel Tip Speed 2985 ft/min
Degree of Angle Right or Left 12 deg
Operating Weight 590 lbs
Width 48 in
Tip Speed @ 22 gpm 3256 ft/min
Height 29.5 in
Why Choose the Bobcat Brush Saw Attachment

Bobcat Brush Saw Attachment Features

High-Tensile Steel Blade

Built for maximum durability, the high-tensile steel blade has replaceable weld-on carbide-tipped teeth.

High-Torque, Low-Speed Motor

The high-torque motor Increases the efficiency of the saw while decreasing the possibility of stalling during cutting action.

Manual Three-Position Boom Angle

View the attachment from up to three positions: center, or 12 degrees left or right. Choose the angle that provides the best cutting visibility.

Steel Deflector Shield

The shield protects the operator and loader from flying debris, minimizing harm and costly machine maintenance.

Special Applications Kit

The special applications kit must be installed on the loader when operating the brush saw attachment. This kit includes a polycarbonate door and windows to protect the machine and operator from debris.

Get a Quote